Everything You Need to Know About LED Flashing Warning Lights

In industrial settings, there are quite a few things that can trigger an accident or a hazard. For the safety of everyone involved, alarms and LED flashing warning lights are used to signal people that danger is approaching, so everyone should evacuate and try to keep himself as safe as possible. Simply put, LED flashing warning lights are of huge importance not just in an industrial setting, but they also find appliance in emergency vehicles, construction vehicles, and so on.

warning-lights

They can either be connected to an alarm, and go off in case of a hazard, or have an ON/OFF switch when used on emergency vehicles, signaling all traffic that the vehicle operating is rushing off to a hospital or a place of accident, for example. When installing the switch, put it in an easily accessible place in your car, so you can reach it without compromising the safety of everyone else in traffic. This way you can turn it on without diverting your attention from the road.

Shop from a reputable supplier to get a durable and easy to use light for your type of vehicle. LED flashing warning lights are relatively inexpensive, even the higher end models, so invest a couple of extra bucks to get the best quality possible.

There are many different colours available, and depending on their use, you should choose accordingly. As a general rule, red is used on ambulances and fire trucks, blue is reserved for law enforcement vehicles, amber is used for work, snow removal and construction trucks, and green is used on personal vehicles operated by emergency volunteers.

When installing warning lights, it’s important to install them properly. You don’t want them to leave you hanging dry in case of an emergency, which will surely cause a huge inconvenience for everyone. If inexperienced, call a professional to help you install them, even though installing them by yourself should be rather easy. It’s as simple as plugging them into the cigarette lighter for power, and mounting the activation switch on any type of surface using a magnet.

You’re good to go! All you have to do now is inspect them every once in a while. Look for cracks or breaks in the clear protected lenses, and if you find any faults, replace them with new ones as soon as possible. You also have to be careful with the cleaning products you use because some chemicals may fog the lens which will effect the quality of the light emitted.

You may also like...